Home > Knowledge > Content

Product Categories

Contact Information

  • Shandong Tengxin Seal Co.,Ltd

  • ADD: Shandong Dezhou Qingyun Economic development zone

  • Mobile: +86-18615271063

  • Tel: +86-534-6100660

  • Email: txsales02@tengxinsy.com

How to Manage Seals
Jun 04, 2018

 Tengxin Lock is engaged in a professional company that produces seals. After many years of experience, many of the seal management methods summarized are now shared with you for better management.

Seal management method

1. Keeping seals and seals in custody, distribution, and recycling, establishing account books and full-time management of personnel.

2. Seals are used for various types of can lids, boxes, and other related metering devices and seals for special circumstances and special locations.

3. Sealed users must take proper care of the lead seals they have received and must not lend them out, transfer them, or copy them forgery.

4. The loading personnel fills in the seal quantity and number according to the actual situation on the requisition.

5. Monthly statistics will be used to summarize the number of lead seals used by each vehicle, the number of scraps used, and the amount of old lead seals recovered.

6. The seals will be damaged during use, and they need to be replaced. The damaged seals must be kept well. Damaged seals make good records.

Manage Seals

7, the use of seals:

(1) The sealer does not have the right to unseal the vehicle can opening device in normal sealing.

(2) All drivers shall not change their seals. If an internal abnormality is found, they must be sealed on site and signed and approved by the customer. At the same time, report to the operating personnel, and the operation is responsible for confirming

(3) The driver is only allowed to seal the can of the vehicle at the scene.

(4) Other personnel must open the seal if they need to work. They should inform the customer to open the seal and seal together.

(5) When sealing the can device, the seal must be clearly visible and numbered.

(6) The length of the wire head after sealing is not to exceed 1.5cm. The extra wire ropes must be cut with oblique pliers to spread the head of the wire.

(7) The identification and numbering patterns are not clear and should be promptly reported to the relevant person in charge and replaced in a timely manner.